Post 7 |
Just a couple inches down to bedrock here but did not cut into it; just cleaned it. |
Aluminum sheeting and roofing paper to form the column. Keeping it wet. |
Scooped in some concrete and plugged in an anchor – in line with the posts to each side and the one opposite.
|
Keeping it wet. Removed the form the next day. |
Cut a post and braced it in. Finally got those footings and more oil. |
The bracing on the left was warped, tilting the post, so a block of wood shoved between the bracing pushed out the warp and straightened the post. |
|
|
|
|
Here's what this post carries, plus decking & people going in and out of the door above.
|
|
Web Design © 2004, Van Blakeman |