1, 2 and 4 foot bar clamps, 2+ each.
Spring clamps, small, nedium and large, 2+ each.
Wood glue.
Spray adhesive glue, one more than your estimate.
Fiberglass drywall tape, standard mesh; not thin.
Scissors to cut tape to needed length.
Corrugated fiberglass panel to place tape on for spraying adhesive.
Putty knives to hold, carry and position wet tape.
Rubber mesh gloves to hold, carry and position wet tape.
2 inch plastic window blind slats (they don't stick to the adhesive).
Hammer to tap slat sideways after adhesive sets.
Wood scraps to hold slat against glued split in plywood.
Beercase cardboard partitions for odd jobs (drink the beer after the job is done; not during).
Black plastic basins to put everything into.
Tarps, old towels and tee-shirts.
"Behr Ultra" paints right over the glued tape; no problem.
"Frogtape" does not bleed. Peels easily [before the paint dries].
